Equipment Specifications Library
Basic Model Information
-
Manufacturer:Ditch Witch
-
Model:RT115 Quad
View Manufacturers View Models
Additional Info
Shipping dimensions when plow and reel carrier are attached:
25' x 89" x 117"
22,000 Lbs
DIMENSIONS
A2 Angle of approach 34°
H1 Height 117 in (2.97 m)
L1 Nose to rear mount length 128 in (3.25 m)
L2 Length - transport 160 in (4.06 m)
L4 Wheelbase 73 in (1.85 m)
W2 Width 89 in (2.26 m)
W4 Tread 71 in (1.80 m)
OPERATION
Forward speeds
Low 2.1 mph (3.4 km/h)
Medium 4.0 mph (6.4 km/h)
High 7.2 mph (11.6 km/h)
Reverse speeds
Low 2.1 mph (3.4 km/h)
Medium 4.0 mph (6.4 km/h)
High 4.2 mph (6.8 km/h)
Vehicle clearance circle (SAE) wall to wall with optional backfill blade
Front steer only 39.5 ft (12 m)
Coordinated steer 27 ft (8.2 m)
Ground clearance 15.5 in (394 mm)
Basic unit weight 15240 lb (6913 kg)
Maximum allowable tractor weight 25000 lb (11340 kg)
Front counterweight 2100 lb (950 k)
BACKFILL BLADE (OPTIONAL)
Blade width 80 in (2.03 m)
Blade height 17 in (430 mm)
Lift height above ground 26 in (660 mm)
Blade drop below ground 10 in (254 mm)
Maximum swing angle (left/right) 30°
Tilt angle (up/down) 24°
POWER PLANT
Engine: John Deere 4045HF285, diesel, liquid cooled, 4 cyl, direct injection, turbocharged with charge air cooling
Displacement 275 in (34.5 L)
Bore 4.19 in (106 mm)
Stroke 5.00 in (127 mm)
Engine manufacturer’s gross power rating per SAE J1349 115 hp 86 kW
Estimated net power per SAE J1349 103 hp 77 kW
Rated speed 2400 rpm
Maximum engine tilt angles
Longitudinal 30°
Lateral 30°
POWER TRAIN
Ground drive: hydrostatic
Differentials: planetary front and rear with rear steering
Service brake: hydrostatic
Parking brake: disc, hand operated
Tracks: 450x86x42 rubber track, chevron pattern
Attachment drive: hydrostatic, lever-operated speed infinitely variable from zero to maximum
HYDRAULIC SYSTEM
Ground drive pump capacity at 2400 rpm 51.5 gpm (195 L/min)
Ground drive pump relief pressure at 2400 rpm 6200 psi (427.5 bar)
Attachment pump capacity at 2400 rpm 51.5 gpm (195 L/min)
Attachment pump relief pressure at 2400 rpm 6200 psi (427.5 bar)
Auxiliary pump capacity at 2400 rpm 14.96 gpm (56.6 L/min)
Auxiliary pump relief pressure at 2400 rpm 3300 psi (227.5 bar)
FLUID CAPACITIES
Fuel tank 38 gal (144 L)
Engine oil 16 qt (15 L)
Hydraulic reservoir 20 gal (76 L)
Hydraulic system 25 gal (95 L)
Cooling system 18 qt (16.8 L)
BATTERY (2 USED)
Group 65, SAE res. cap 165 min., SAE cold crank @ 0° F (-18° C), 875 amp
Auxiliary power outlet - 12 volt, 10 amp
VIBRATION LEVEL
Average vibration transmitted to the operator’s hand and whole body while plowing is 8.12 and 1.44 m/sec2 respectively.
Operator seat complies with ISO 7096.
NOISE LEVEL
Operator ear sound pressure level is 94 dBa per ISO 6394
Exterior sound power level is 110 dBa per ISO 6393
25' x 89" x 117"
22,000 Lbs
DIMENSIONS
A2 Angle of approach 34°
H1 Height 117 in (2.97 m)
L1 Nose to rear mount length 128 in (3.25 m)
L2 Length - transport 160 in (4.06 m)
L4 Wheelbase 73 in (1.85 m)
W2 Width 89 in (2.26 m)
W4 Tread 71 in (1.80 m)
OPERATION
Forward speeds
Low 2.1 mph (3.4 km/h)
Medium 4.0 mph (6.4 km/h)
High 7.2 mph (11.6 km/h)
Reverse speeds
Low 2.1 mph (3.4 km/h)
Medium 4.0 mph (6.4 km/h)
High 4.2 mph (6.8 km/h)
Vehicle clearance circle (SAE) wall to wall with optional backfill blade
Front steer only 39.5 ft (12 m)
Coordinated steer 27 ft (8.2 m)
Ground clearance 15.5 in (394 mm)
Basic unit weight 15240 lb (6913 kg)
Maximum allowable tractor weight 25000 lb (11340 kg)
Front counterweight 2100 lb (950 k)
BACKFILL BLADE (OPTIONAL)
Blade width 80 in (2.03 m)
Blade height 17 in (430 mm)
Lift height above ground 26 in (660 mm)
Blade drop below ground 10 in (254 mm)
Maximum swing angle (left/right) 30°
Tilt angle (up/down) 24°
POWER PLANT
Engine: John Deere 4045HF285, diesel, liquid cooled, 4 cyl, direct injection, turbocharged with charge air cooling
Displacement 275 in (34.5 L)
Bore 4.19 in (106 mm)
Stroke 5.00 in (127 mm)
Engine manufacturer’s gross power rating per SAE J1349 115 hp 86 kW
Estimated net power per SAE J1349 103 hp 77 kW
Rated speed 2400 rpm
Maximum engine tilt angles
Longitudinal 30°
Lateral 30°
POWER TRAIN
Ground drive: hydrostatic
Differentials: planetary front and rear with rear steering
Service brake: hydrostatic
Parking brake: disc, hand operated
Tracks: 450x86x42 rubber track, chevron pattern
Attachment drive: hydrostatic, lever-operated speed infinitely variable from zero to maximum
HYDRAULIC SYSTEM
Ground drive pump capacity at 2400 rpm 51.5 gpm (195 L/min)
Ground drive pump relief pressure at 2400 rpm 6200 psi (427.5 bar)
Attachment pump capacity at 2400 rpm 51.5 gpm (195 L/min)
Attachment pump relief pressure at 2400 rpm 6200 psi (427.5 bar)
Auxiliary pump capacity at 2400 rpm 14.96 gpm (56.6 L/min)
Auxiliary pump relief pressure at 2400 rpm 3300 psi (227.5 bar)
FLUID CAPACITIES
Fuel tank 38 gal (144 L)
Engine oil 16 qt (15 L)
Hydraulic reservoir 20 gal (76 L)
Hydraulic system 25 gal (95 L)
Cooling system 18 qt (16.8 L)
BATTERY (2 USED)
Group 65, SAE res. cap 165 min., SAE cold crank @ 0° F (-18° C), 875 amp
Auxiliary power outlet - 12 volt, 10 amp
VIBRATION LEVEL
Average vibration transmitted to the operator’s hand and whole body while plowing is 8.12 and 1.44 m/sec2 respectively.
Operator seat complies with ISO 7096.
NOISE LEVEL
Operator ear sound pressure level is 94 dBa per ISO 6394
Exterior sound power level is 110 dBa per ISO 6393
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.