Cerca

• Fabricante:
  Vermeer
• Modelo:
  SC30TX

KEY FEATURES

LONGEST TRACKS IN ITS CLASS: Provides consistent stability with easier loading and unloading of the machine compared to shorter tracked models. The longer tracks offer best-in-class low ground pressure, which helps reduce the possibility of turf damage.

SMOOTH OPERATION: The exclusive SmartSweep control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.

PATENTED YELLOW JACKET CUTTER SYSTEM: The Vermeer-exclusive Yellow Jacket cutter system is designed to provide faster, easier serviceability, as well as extended pocket and tooth life.

25 HP (18.6 KW) EFI ENGINE: Starts well during cold weather, makes choke cables obsolete and offers improved fuel economy over comparable carbureted gas engines.

OPERATOR PRESENCE SYSTEM: Control handle for the boom swing and boom raise/lower is equipped with operator presence capacitance-sensing handle. This system is intended to help protect the operator.

HYDRAULICALLY DRIVEN CUTTER WHEEL AND GROUND DRIVE: The elimination of belts or chain drives reduces service and maintenance.

GENERAL
-Length: 94" (238.8 cm)
-Width: 35" (88.9 cm)
-Height: 49" (124.5 cm)
-Weight: 1550 lb (703.1 kg)

ENGINE
-Make and model: Kohler ECH740 EFI
-Number of cylinders: 2
-Max gross horsepower: 25 hp (18.6 kW)
-Max torque: 42 ft-lb (56.9 Nm)
-Fuel tank capacity: 6.8 gal (25.7 L)
-Fuel type: Gas
-Air cleaner: 6" (15.2 cm) 2-stage dry
-Oil flter: Spin-on
-Oil volume with filter: 2 qt (1.9 L)
-Cooling medium: Air/Oil

CUTTER WHEEL DRIVETRAIN
-Cutter wheel diameter without teeth: 16" (40.6 cm)
-Cutter wheel thickness: .5" (1.3 cm)
-Cutter wheel straight-line dimension: 35.5" (90.2 cm)
-Cutter wheel cut above ground: 25" (63.5 cm)
-Cutter wheel cut below ground: 12" (30.5 cm)
-Tooth description: Yellow Jacket™ cutter system
-Number of teeth: 16
-Number of indexes: 2
-Number of pockets: 16
-Reversible pockets: Yes
-Cutter wheel guard: Yes
-Chip containment: 2.2 cu ft (.1 m3)

HYDRAULIC SYSTEM
-Tank capacity: 9 gal (34.1 L)
-Recommended oil type: ISO 68
-Filtration method: In-line return filter
-Pump flow at max rpm: 16 gpm (60.6 L/min)
-System relief pressure: 2750 psi (189.6 bar)
-Flow control: SmartSweep control system
-Directional control: Standard
-Oil cooler: Fan-cooled

ELECTRICAL SYSTEM
-System voltage: 12 V
-Battery: 405
-Standard gauge: Hour meter/tach
-Switches: Cutter wheel drive
-Controller: Yes

TRACK DRIVE SYSTEM
-Track type: Rubber 7" (17.8 cm) width
-Track length on ground: 31.4" (79.8 cm)
-Type of idler: Cast
-Number of idlers: 5
-Track drive pump type: Hydrostatic
-System relief pressure: 2900 psi (199.9 bar)
-Pump flow at max rpm: 11.4 gpm (43.2 L/min)
-High-speed travel: 3.2 mph (5.1 km/h)
-Ground-bearing pressure - soft ground: 3.4 psi (23.4 kPa)