Esta página ha sido traducida usando Google Translate

Biblioteca de especificaciones de equipos

Información básica del modelo

  • Fabricante:
    Vermeer
  • Modelo:
    D10x15
  • Tamaño de la plataforma:
    0 - 10,000 lbs Pullback

Ver fabricantes Ver modelos Volver al listado

Presupuesto

Max Carriage Speed 90 ft/min 27.4 m/min
Fuel Tank Capacity 17 gal 64.4 L
Entry Angle 16 degrees
Length 15' 8'' 478 cm
Pullback 10000 lbs 4535.9 kg
Pipe Diameter 1.66” 4 cm
Type Forged
Hydraulic Tank Capacity 23 gal 87.1 L
Rated Engine RPM 3000 rpm 3000 rpm
Min Bend Radius 29.1 m
Fluid Tank 55 gal 208.2 L
Weight 8980 lbs 4073.3 kg
Max Pressure 750 psi 51.7 bar
Make and Model Perkins
Manufacturer's Gross HP Rating 50 hp 37.3 kw
Weight 17 kg
Pump Pressure 750 psi
Width 35.5'' 91cm
Rod Carrying Capacity 440'
Pump Output 13.5 gpm
Height 86.5'' 219.7 cm
Length 10 Ft. 3 m
Max Flow 13.5 gpm 51.1 L/min
Drill Stem 10' 0'' 3m
Joint Diameter 42 mm
Max Spindle Speed 180 rpm 180 rpm
Thrust 10000 lbs 4535.9 kg
Ground Drive Speed 1.5 mph 2.4 km/h
Rod Loader yes - optional
Min Bore Diameter 3" 7.6 cm
Engine Perkins

Información adicional

Oil-well drilling installation
Length: 478 cm
Width: 91 - 124 cm
with linkage change mechanism: 107 - 124 cm
Height (in operating position): 219.7 cm
Operating weight
with linkage box: 3447 kg
with linkage box and
autom. Linkage change-over switch: 3946 kg
hydr. Tightening device: Yes
Driving speed: 2,4 km/h
integrated drill pipes: Yes
autom. Linkage change-over switch: (optionally)
stationary anchoring system: Yes
Work slip thrower: Yes

Operational data
max. Number of revolutions: 180 U/min.
max. Torque: 2031 Nm
effect. Feed motion u. Pull-back power: 4536 kg
electrical. System: 12 V

Suspension system
Option 1:
max. Mechanical handling capacity: 51.10 l/min.
Option 2:
Use of other high pressure suspension plants
possible.

Drive
Engine: Perkins®
Achievement: 50 PS/37 KW
max. Revolutions: 3000 U/min.

Drill pipes
one-piece forged: Yes
Single length: 3 m
Diameter: 42 mm
Bending radius: 29.1 m
Weight: 17 kg

Drilling parameter
min. Hole diameter: 80 mm
The drilling head works with all well-known
Detection systems.
max. Drilling length varies *)
*) Dependent on ground condition,
Hole diameter and weight too
shifting product.

Amount of filling
Hydraulic oil: 87 l
Engine oil inclusive. Filter 8.2 l
Fuel: 64 l

---------------------

DIMENSIONS AND WEIGHTS
Weight: 8980 lbs (4073.3 kg)

ENGINE
Make and Model: Perkins
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 50 hp (37.3 kw)
Net Horsepower: 47 hp (35.1 kw)

OPERATIONAL
Thrust: 10000 lbs (4535.9 kg)
Pullback: 10000 lbs (4535.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 90 ft/min (27.4 m/min)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 3 " (7.6 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes- optional
Drill Rack Angle: 16 deg

FLUID CAPACITIES
Fuel Tank: 17 gal (64.4 L)
Engine Crankcase with Filter: 8.7 qt (8.2 L)
Hydraulic Tank: 23 gal (87.1 L)
Drilling Fluid System Option One
Maximum Flow: 13.5 gpm (51.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 55 gal (208.2 L)

FEATURES
Breakout System: Hydraulic - open top
Stakedown System: Yes - stationary

Ver fabricantes Ver modelos Volver al listado

Esta información se proporciona solo con fines informativos. HDD Broker, Inc. no puede garantizar la exactitud o integridad de esta información. Esta información está sujeta a cambios por parte del fabricante. Algunas especificaciones pueden variar según el año del modelo.

HDD Broker utiliza cookies y recopila información personal en sus sitios web.

Para obtener más información, consulte la Política de privacidad y la Política de cookies de HDD Broker. Al hacer clic en "Acepto", usted indica que ha ajustado la configuración de su navegador para que se ajuste a sus preferencias y acepta el uso de cookies por parte de HDD Broker.

x